32GB (8GB 2Rx8 1G x 72-Bit x 4 pcs.) PC4-2133 CL15 Registered w/Parity 288-Pin DIMM Kit
For Servers & Workstation.
DESCRIPTION VALUERAM1471-001.A00 04/30/15
*Power will vary depending on the SDRAM used. KVR21R15D8K4/32 32GB (8GB 2Rx8 1G x 72-Bit x 4 pcs.) PC4-2133 CL15 Registered w/Parity 288-Pin DIMM Kit Continued >> kingston.com FEATURES ValueRAM's KVR21R15D8K4/32 is a kit of four 1G x 72-bit (8GB) DDR4-2133 CL15 SDRAM (Synchronous DRAM) registered w/ parity, 2Rx8, ECC, memory module, based on eighteen 512M x 8-bit FBGA components per module. Total kit capacity is 32GB. The SPD is programmed to JEDEC standard latency DDR4-2133 timing of 15-15-15 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:
• Power Supply: VDD=1.2V (1.14V to 1.26V) • VDDQ = 1.2V (1.14V to 1.26V) • VPP - 2.5V (2.375V to 2.75V) • VDDSPD=2.25V to 2.75V • Functionality and operations comply with the DDR4 SDRAM datasheet • 16 internal banks • Bank Grouping is applied, and CAS to CAS latency (tCCD_L, tCCD_S) for the banks in the same or different bank group accesses are available • Data transfer rates: PC4-2133, PC4-1866, PC4-1600 • Bi-Directional Differential Data Strobe • 8 bit pre-fetch • Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop) • Supports ECC error correction and detection • On-Die Termination (ODT) • Temperature sensor with integrated SPD • This product is in compliance with the RoHS directive. • Per DRAM Addressability is supported • Internal Vref DQ level generation is available • Write CRC is supported at all speed grades • CA parity (Command/Address Parity) mode is supported
top of page
bottom of page